Product Technical Sheet

BTI ALU BAND Product Description
BTI ALU BAND is a bitumen based, cold-applied waterproofing tape with an aluminum foil coating on the top side and a self-adhesive bottom side.

Surface: Aluminum Foil (Gray, Tile Color, Green)
Application Temperature: +5 ° C 30 ° C
Thickness: 1.50 mm

It provides insulation by sticking to all kinds of surfaces such as wood, metal, glass, plastic, plaster, concrete.

It is UV resistant thanks to the aluminum foil on its upper surface. Thanks to its flexible structure, it can be easily applied even on inclined surfaces. It is suitable for contact with bitumen. It is self-adhesive. It can be easily applied. It has wide application area.

Surface Preparation
The application surfaces should be dry. Surfaces must be clean, strong, free of carriers and free particles. Layers that reduce adherence such as oil, grease, dirt, paint, cement grout, rust, mold oil, salt vomiting should be thoroughly cleaned before applying. In applications on absorbent surfaces such as concrete, plaster, chipboard, bitumen based primer is recommended.

The removable film layer on one side of BTI ALU BAND is peeled and pressed firmly on the application surfaces. The band should be pressed to ensure full contact with the application surface at all points.

Width: 10-15-20-25-30-60 cm
Length: 10 m
Shelf Life: 1 year in original, unopened packaging.

It should be protected from excessive heat and humidity in environments between + 5 ° C and + 30 ° C that do not receive direct sunlight.

It may harm health in contact with skin. Do not apply in frost or at risk of frost. Protect the applied surface from rain, frost, pedestrian traffic and high humidity until it is completely dry. Do not apply in conditions where surface and ambient temperature is lower than + 5 ° C and higher than + 30 ° C. Protect the surface from heavy traffic for 24 hours after the application.

* For the safety data sheet, please read the QR code in the product technical sheet.

Related Items